Printertales

  The easiest way to reset a Lexmark printer is by following these steps:             Turn off your Lexmark printer.  Hold down the reset button combination, which includes two to three buttons. On touchscreen models, you can go to Settings > Devices > Restore Factory Defaults until Restore Factory Defaults appears on the screen.  Then, release the buttons, and the printer finishes printing. Finally, it will come back to its original state.  However, a single reset method won’t work for all problems. Hence, there are four main types of reset methods for a Lexmark printer.  Method 1: Soft reset (power cycle)  Turn off your printer using the power button.  Disconnect it from the wall by gently pulling the cord.  Wait 60 seconds, then plug it back in and turn it on.  Method 2: Factory reset on touchscreen models  Tap Settings from the home screen.  Tap Device and then tap Restore Factory Default...

Is your Epson printer not printing or printing blank sheets? If yes, you might be dealing with more than two problems at the same time. Your printer is not printing or showing “printing” status, but nothing comes out due to a software issue. On the other hand, a printer leaving blank paper happens due to an ink delivery problem in the print head.  To fix this issue, you need to run a nozzle check and read it using these steps:  First, load a plain A4 or letter sheet. Go to Setup > Maintenance > Print head nozzle check.  The printer will print a horizontal line in each ink color.  Solid lines show that the printhead is fine, and the main culprit is something else.  Faded sections, gaps, or even missing colors show that ink isn’t reaching the nozzle array, causing blank prints.  If you find out that the problem is in the print head, you can clean it using the built-in head cleaning cycle from the maintenance menu. Ensure you don’t power off the cleaning...

Replacing toner in Brother printers is an easy task that doesn’t need a complex procedure. All you need is a genuine and correct replacement toner cartridge for your exact printer model. You can match the label inside the front cover, not the TN number, to find the correct cartridge match.  Here are the steps involved in replacing a toner in a Brother printer:  Open the front cover facing you.  Release the drum and toner assembly, and they’ll come out as a single unit.  Place the assembly on a flat surface. Look for the colored lock lever and press it down to slide the empty toner cartridge out.  Keep the drum unit down carefully away from light.  Unpack the new toner cartridge and remove its protective seal.  Slide the unpacked cartridge into the drum unit until you hear a click sound.  Slide the green tab on the drum unit once, and return it to the home position, matching the arrow on the tab. It’s important to reset the corona wire cleaning tab...

  Cleaning the Epson printer’s print head is a crucial step to improve the printer’s functionality. It involves a few easy-to-follow steps as mentioned below:  Check the nozzle pattern to identify actual clogs. On Windows, go to the Maintenance tab and select Nozzle Check.  On Mac, go to System Settings > Printers & Scanners, select your printer, and open Options & Supplies > Utility > Open Printer Utility and select Nozzle Check.  If you see problems during nozzle check, run the standard Head Cleaning function from the Maintenance tab; it will take about 1-2 minutes.  Now, the printer will draw ink from the cartridges or ink tank through the nozzles, pushing the dried ink out.  Run power cleaning from the Maintenance menu. It releases more ink from the system in a single pass.  If power cleaning doesn’t show a clear nozzle pattern, choose Power Ink Flushing, which will replace all the ink sitting between tubes and the ink tank.  ...

  There are several ways to connect a Lexmark printer to WiFi, including the wireless setup wizard, the WPS push-button method, the Lexmark printer app, and WiFi Direct.  Method 1: Using Wireless Setup Wizard (control panel)  Go to the printer’s home screen and select Settings.  Tap Network/Ports, then the Wireless option.  Choose Set up now or Wireless Setup Wizard.  Select your network’s SSID from the scanned list, enter the WiFi password on the keyboard, and select Done.  Let the confirmation screen show that the printer is connected wirelessly.  Method 2: WPS Push Button Method  Go to Settings on your printer, tap on Network/Ports, and then select Wireless.  Then, select Wi-Fi Protected Setup, and then tap Start Push Button Method.  Press the physical WPS button on your router within 2 minutes.  Let the printer automatically connect once it detects the WPS signal.  Method 3: Using Lexmark Print App  Open the Play ...

  Replacing the drum unit on a Brother printer is quite straightforward. All you need to do is to follow the instructions given below:  Keep the printer turned on, and open its front cover by pressing the release button.  Hold the drum handle and slightly slide the assembly towards you. Then, place it on the paper.  Press the green lock lever on the side of the drum unit. Then, pull the toner cartridge upward and out. Now set the toner aside for reuse in the new drum.  Unpack your new drum and protect it from direct sunlight. Remove all packaging materials such as shipping labels and plastic films.  Insert the toner cartridge into the new drum until you hear a clicking sound, indicating it is in place. Once it is seated correctly, the green lever will lift back on its own.  Clean the corona wire, which is a small tab labeled with an arrow or marked in another color. Slide that tab back and forth 5-6 times to clean the wire, and return the tab to its or...